[PSUBS-MAILIST] Pressure Test Chamber

[Stephen Fordyce via Personal_Submersibles]

Hi Alan,
I have one in Melbourne if you want to send things across the ditch - it's
about 250mm inside diameter, 800mm long and good to 200m water depth.

For making your own you could do it pretty easily enough with standard pipe
and flanges, although it will need pressure quality welding.

Cheers,
Steve
On 14/11/2015 3:40 PM, "Alan James via Personal_Submersibles" <
personal_submersibles at psubs.org> wrote:

> Hi all,
> I need to find or make a test chamber a minimum
> of around 6" internal diameter & about 12" high.
> I could go a lot larger than that if something was suitable.
> I don't need to test above 400 psi.
> Anything off the shelf that I could cannibalize?
> Or any ideas on construction.
> Cheers Alan
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151114/80989d41/attachment.html>