[PSUBS-MAILIST] Pressure Test Chamber

[Gregory Snyder via Personal_Submersibles]

Loud and clear 

> On Nov 14, 2015, at 9:42 PM, Adam via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Test
> 
>> On Sat, Nov 14, 2015 at 9:08 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> Hank,
>> that sounds a really good idea.
>> Will have a look for something suitable during the week.
>> Cheers Alan
>> 
>> From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
>> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
>> Sent: Sunday, November 15, 2015 2:37 PM
>> 
>> Subject: Re: [PSUBS-MAILIST] Pressure Test Chamber
>> 
>> Alan,
>> Just buy a hydraulic cylinder, works a charm and there is no welding plus it is rated.
>> Hank
>> 
>> 
>> 
>> 
>> 
>> On Saturday, November 14, 2015 6:13 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> 
>> Thanks Hugh,
>> I am making up 8 lights (including navigational) & their connectors
>> + thruster through hulls so will have a minimum of 29 items to test.
>> It would probably pay for me to have my own.
>> Do you want to sell your stuff? Otherwise I was going to head to a
>> pipe manufacturer & see what bits I could pick up.
>> Cheers Alan
>> 
>> From: Hugh Fulton via Personal_Submersibles <personal_submersibles at psubs.org>
>> To: 'Personal Submersibles General Discussion' <personal_submersibles at psubs.org> 
>> Sent: Sunday, November 15, 2015 10:08 AM
>> Subject: Re: [PSUBS-MAILIST] Pressure Test Chamber
>> 
>> Alan,
>> I have a deal for you.
>> I have the cylinder, pump and gauges but need the flanges made etc.
>> You can use it whenever but I get to keep it.
>> Hugh
>>  
>>  
>> 
>> 
>> From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of Alan James via Personal_Submersibles
>> Sent: Saturday, 14 November 2015 5:37 p.m.
>> To: Personal Submersibles General Discussion
>> Subject: [PSUBS-MAILIST] Pressure Test Chamber
>>  
>> Hi all,
>> I need to find or make a test chamber a minimum
>> of around 6" internal diameter & about 12" high.
>> I could go a lot larger than that if something was suitable.
>> I don't need to test above 400 psi.
>> Anything off the shelf that I could cannibalize?
>> Or any ideas on construction.
>> Cheers Alan
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> 
>> 
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> 
>> 
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> 
>> 
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151114/6b3419d0/attachment.html>