[PSUBS-MAILIST] Fw:

[hank pronk via Personal_Submersibles]

This is progress at the end of day two,  it went faster than the dome conversion because I could cut the hole in the aft head from inside.  That saved building a temporary bulk head for spark capture.   Tomorrow I will fit the heavy ring to the head and tack in place, then I have to build a rotator for welding.HankOh ya, I am planning a fairing from the hull to the pod

      On Friday, September 25, 2015 5:03 PM, xxx xxxxx <mp13 at live.ca> wrote:
   

  


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150925/23e001a1/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0197.jpeg
Type: image/jpeg
Size: 18176 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150925/23e001a1/attachment-0003.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0198.jpeg
Type: image/jpeg
Size: 20183 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150925/23e001a1/attachment-0004.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0199.jpeg
Type: image/jpeg
Size: 18254 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150925/23e001a1/attachment-0005.jpeg>