[PSUBS-MAILIST] agm battery

[Sean T. Stevenson via Personal_Submersibles]

To pressure compensate the interior of a battery like that, wouldn't you need to use battery electrolyte and not oil?

Sean


On April 5, 2016 4:42:57 PM MDT, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>Alan,Did you successfully make a deep sea AGM battery?    I realize
>they are pressurized but can I drill and fill with oil then put a
>spring loaded pressure compensator  into the drilled hole to create the
>internal pressure.  So the battery would have a constant pressure
>inside at the surface then it increases as the battery dives to match
>water pressure.  Will that work?  I would like to move my AGM's  to the
>outside of Elementary 3000.Hank
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160405/2e88fd35/attachment.html>