[PSUBS-MAILIST] Fw:

[Alan James via Personal_Submersibles]

Thanks Hank,beautiful lake. What about buying, making or borrowing an anchor winch?You no doubt had something similar in your rov days!The thought came to mind that if it is slightly rough the bobbing action of the boatcould cause your drop tray to release. Or are you using a separate line for that?Cheers Alan

      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Thursday, April 21, 2016 10:03 AM
 Subject: [PSUBS-MAILIST] Fw:
   
First test was all good, Elementary 3000 tows nice and strait but slow.  It took me 1\2 hr to go about 1.5 -2 miles.    The launching of both boat and sub is also good except I need to make a small change to the front roller the boat sits on, it is to high.  The only tough part is installing the 30 hp motor while the boat is in the water.  I have to take it slow and it is kinda heavy.    I have to install and remove the mother each time I launch and retrieve.I am going to rig up a slide so that when I pull on the rope to retrieve the sub, a tray will tip out the weights that make it sink.  Then the rope will pull on the valve mechanism in case the sub has taken on water weight.   It is pretty hard on the hands pulling it up with such a small line, even with heavy welding gloves on.  This way it will come up on its own.Hank

     On Wednesday, April 20, 2016 3:52 PM, xxx xxxxx <mp13 at live.ca> wrote:
 

  https://www.youtube.com/watch?v=f4_tO8yzoaE



   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160420/0b080944/attachment.html>