[PSUBS-MAILIST] manipulator

[hank pronk via Personal_Submersibles]

Hi RickI posted pictures a couple days ago, but they did not make it here.  I will assemble the arm tomorrow and take a picture with my proper camera and post.Hank 

    On Wednesday, December 14, 2016 3:16 PM, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Hank, do you have any construction and finished pictures to show?
Rick
On Wed, Dec 14, 2016 at 11:30 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Wow , big job, but my manipulator is done and ready for paint.  I managed to build it so all functions operate at 100 psi or less.  That means it will be a pretty low pressure system.  I will only need about 150 psi over ambient plus the cross section of the piston rod.Hank
______________________________ _________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs. org
http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles




_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161214/6e2e5d90/attachment.html>