[PSUBS-MAILIST] cutting Titanium

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Fri Dec 23 14:14:58 EST 2016


Sean,Looking at the pictures it may make more sense to leave it as is but put it on a huge diet to make it manageable.  Got to get it to 20 tons from 38Hank 

    On Friday, December 23, 2016 12:10 PM, Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 You need to be careful working with titanium in order to avoid setting it on fire. Large pieces which are effective heat sinks are less of a problem, but machining chips can ignite readily and will burn vigorously because the combustion product (titanium oxide) is so stable.You can flame cut, plasma cut, etc., but keep a class D extinguisher handy just in case.Sean


On December 23, 2016 8:08:02 AM PST, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Hi All,Looks like I can buy the old Sever submarine in Alabama.  The sub is WAY to big to be practical, so I am am in need of advice on how to cut the titanium heads off the pressure hull.  Does anyone have experience with cutting heavy titanium?Hank
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


-- 
Sent from Kaiten Mail. Please excuse my brevity.
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161223/9aeb3297/attachment-0001.html>


More information about the Personal_Submersibles mailing list