[PSUBS-MAILIST] cutting Titanium

Gregory Snyder via Personal_Submersibles personal_submersibles at psubs.org
Fri Dec 23 17:31:35 EST 2016


Pictures of the sub?
Super exciting!

> On Dec 23, 2016, at 2:27 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Emile,
> I think I had a bad idea to cut it down.  I think it should stay in tact, and if I can get it down to 20 tons, I can get it home easily.
> Hank
> 
> 
> On Friday, December 23, 2016 1:23 PM, emile via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> Hank , As mentioned is plasma the only way. But that thicknes..
>  
> Welding should be done in a shielded environment  (glove box filled with Argon/Helium
> Machining is difficult tough…
>  
> Emile
>  
> Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] Namens hank pronk via Personal_Submersibles
> Verzonden: vrijdag 23 december 2016 17:08
> Aan: Personal Submersibles General Discussion
> Onderwerp: [PSUBS-MAILIST] cutting Titanium
>  
> Hi All,
> Looks like I can buy the old Sever submarine in Alabama.  The sub is WAY to big to be practical, so I am am in need of advice on how to cut the titanium heads off the pressure hull.  Does anyone have experience with cutting heavy titanium?
> Hank
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161223/f850798c/attachment.html>


More information about the Personal_Submersibles mailing list