[PSUBS-MAILIST] Electrical thru-hull

[Brian Cox via Personal_Submersibles]

Tim, John,
               Isn't there an issue with water migrating down that round wire like that ?   Also I'm looking for a good co-ax thru hull design.

Brian Cox 

--- personal_submersibles at psubs.org wrote:

From: T Novak via Personal_Submersibles <personal_submersibles at psubs.org>
To: "'Personal Submersibles General Discussion'" <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Electrical thru-hull
Date: Sat, 6 Feb 2016 10:44:57 -0800

Jon, 
Psubs member Brent Hartwig posted on Psubs Projects an epoxy filled
electrical thru-hull design. No depth rating specified.
https://onedrive.live.com/?id=5085D10EB6AFE47C!748&cid=5085D10EB6AFE47C

Tim

-----Original Message-----
From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
On Behalf Of Jon Wallace via Personal_Submersibles
Sent: Saturday, February 6, 2016 7:52 AM
To: Personal Submersibles General Discussion
<personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] Electrical thru-hull


Anyone have a home-brewed design for electrical thru-hull that I can adapt
for the K-boat?

Jon

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles