[PSUBS-MAILIST] Fw: flang facing

Stephen Fordyce via Personal_Submersibles personal_submersibles at psubs.org
Sun Jan 10 19:55:13 EST 2016


No worries, you might be able to use something else, like graphite from a
pencil. Sounds like you got it pretty good regardless!
On 11/01/2016 11:49 AM, "hank pronk via Personal_Submersibles" <
personal_submersibles at psubs.org> wrote:

> Thank you Steve, seems the ugliest inventions work the best ;-)    I
> should get some blue indicator just to have it on hand, good idea.
> Hank
>
>
> On Sunday, January 10, 2016 5:45 PM, hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Okay, No problem, I told my wife what I was up against and she insisted
> she could manage it.  I gave her a lesson in chain come  along operations
> and we did a dry run, including tapping the hatch level.  I hopped in
> feeler gauges in my teeth and flashlight in hand, She did a perfect job,
> rolled the gantry in place lowered and leveld the hatch in place.  My angle
> is off by .004 in , that is not bad for a rookie with limited tooling!
>  tomorrow I will take it down some more with the angle corrected and when
> my bride returns from work I will test fit again before the final sizing.
>
> I am sure all sub builders have had there wife help out, I am sure there
> are some good stories,,,,Brian....
> Hank
>
>
> On Sunday, January 10, 2016 5:05 PM, hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Thanks Alan,
> Hey guys I have a tricky situation here.  I have lowered the hatch onto
> the conical seat and it fits nice or at least as far as I can tell.  I am
> alone in this mission so I can not get inside the sphere and place the
> hatch on the land by myself  to determine if the fit is correct from
> inside.  How can I determine if the two angles are fitting perfect?
>  without being inside.  I was thinking about plasti gauge for engine
> rebuilding, it is a little plastic wire that squeezes to a certain
> thickness for a given gap.
> Maybe there is a better idea out there.
> I still have to take the hatch OD down about .050 in so I have wiggle room
> to adjust the angle if need be.
> HELP
> Hank
>
>
> On Sunday, January 10, 2016 3:11 PM, Alan James via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Thanks for the update Hank,
> it's moving along quickly.
> Alan
>
>
>
> ------------------------------
> *From:* hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Sunday, January 10, 2016 11:22 AM
> *Subject:* [PSUBS-MAILIST] Fw: flang facing
>
> New video
> Hank
>
> On Saturday, January 9, 2016 3:21 PM, xxx xxxxx <mp13 at live.ca> wrote:
>
>
> https://www.youtube.com/watch?v=eweppPfzZrw
>
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160111/33690e7c/attachment-0001.html>


More information about the Personal_Submersibles mailing list