[PSUBS-MAILIST] Fw: flang facing

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Sun Jan 10 20:56:09 EST 2016


Alan,Yes I have air because the port is not in yet, the hatch pops up super easy because it is a steeper angle than tooling.Speaking of that, I am machining the ports next, I will practice on the small ports first because I have extras.Hank 

    On Sunday, January 10, 2016 6:13 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Glad you got your wife on board Hank.I was thinking of how tapers are used to hold tooling in & wondered
If you got inside & the hatch jammed would you have air?
 Alan

      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Monday, January 11, 2016 1:48 PM
 Subject: Re: [PSUBS-MAILIST] Fw: flang facing
  
Thank you Steve, seems the ugliest inventions work the best ;-)    I should get some blue indicator just to have it on hand, good idea.Hank 

    On Sunday, January 10, 2016 5:45 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Okay, No problem, I told my wife what I was up against and she insisted she could manage it.  I gave her a lesson in chain come  along operations and we did a dry run, including tapping the hatch level.  I hopped in feeler gauges in my teeth and flashlight in hand, She did a perfect job, rolled the gantry in place lowered and leveld the hatch in place.  My angle is off by .004 in , that is not bad for a rookie with limited tooling!  tomorrow I will take it down some more with the angle corrected and when my bride returns from work I will test fit again before the final sizing.
I am sure all sub builders have had there wife help out, I am sure there are some good stories,,,,Brian....Hank 

    On Sunday, January 10, 2016 5:05 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Thanks Alan,Hey guys I have a tricky situation here.  I have lowered the hatch onto the conical seat and it fits nice or at least as far as I can tell.  I am alone in this mission so I can not get inside the sphere and place the hatch on the land by myself  to determine if the fit is correct from inside.  How can I determine if the two angles are fitting perfect?  without being inside.  I was thinking about plasti gauge for engine rebuilding, it is a little plastic wire that squeezes to a certain thickness for a given gap.  Maybe there is a better idea out there.I still have to take the hatch OD down about .050 in so I have wiggle room to adjust the angle if need be.HELPHank 

    On Sunday, January 10, 2016 3:11 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Thanks for the update Hank,it's moving along quickly.Alan
 

      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Sunday, January 10, 2016 11:22 AM
 Subject: [PSUBS-MAILIST] Fw: flang facing
  
New videoHank

     On Saturday, January 9, 2016 3:21 PM, xxx xxxxx <mp13 at live.ca> wrote:
 

  https://www.youtube.com/watch?v=eweppPfzZrw



   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160111/8d5eac7a/attachment-0001.html>


More information about the Personal_Submersibles mailing list