[PSUBS-MAILIST] PSUBS light project status

[Ken Martindale via Personal_Submersibles]

You are welcome,

 

Ken

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of Alan James via Personal_Submersibles
Sent: Wednesday, July 06, 2016 5:27 PM
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] PSUBS light project status

 

That's great news Ken,

good to have your expertise back on board.

Alan

 

  _____  

From: Ken Martindale via Personal_Submersibles <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> >
To: 'Personal Submersibles General Discussion' <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> > 
Sent: Thursday, July 7, 2016 8:31 AM
Subject: Re: [PSUBS-MAILIST] PSUBS light project status

 

To all,

 

My wife has been cleared of cancer and I’ll be back on the LED project, starting tomorrow.

 

Sorry to drop out for so long,

 

Ken Martindale

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of Cliff Redus via Personal_Submersibles
Sent: Friday, July 01, 2016 10:40 PM
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> >
Subject: Re: [PSUBS-MAILIST] PSUBS light project status

 

Alec, I was doing the 1 arm can for the light and Ken was doing the electronics.  Ken bailed out so unless someone steps up to take over the LED driver side of the project, we are dead in the water.  If someone could source a small OTS LED driver, I could go forward.  

On Friday, July 1, 2016, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> > wrote:

Hi gents,

 

I have an almost-ready sub but no lights, so was wondering whether to make them per the PSUBS-designed model in the community projects section of the website. I'm in awe of those drawings! However, they show a printed wiring board that is a placeholder for a part still to be designed. I was wondering if that might have happened, or if there might be an ETA?  

 

Thanks,


Alec

 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org <mailto:Personal_Submersibles at psubs.org> 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160707/91a68e62/attachment-0001.html>