[PSUBS-MAILIST] CAD for presentation

Thu Jun 9 17:59:30 EDT 2016

Sorry, I should of been a little clearer. I have some heavy steel rings
that I made and welded one to the battery pod and one to the end cap that
has an O ring groove in it. Since they are not stainless, I need to keep
something on the bare steel to keep the oxygen off them so they don't rust.
I have been using silicone on them but my intention was to see if I could
use something else less expensive but still use the proper silicone on the
O rings and wanted to know if Vaseline would work.
So far, the Vaseline has been working on all my windows but I better re
check em just encase!

Rick

On Thu, Jun 9, 2016 at 11:26 AM, hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Gee, I hope they alright!
>
>
> On Thursday, June 9, 2016 3:23 PM, Hugh Fulton via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> There was a young married couple that didn’t know the difference between
> Vaseline and putty.
> All their windows fell out.
>
>
>
>
> *From:* Personal_Submersibles [mailto:
> personal_submersibles-bounces at psubs.org] *On Behalf Of *Rick Patton via
> Personal_Submersibles
> *Sent:* Friday, 10 June 2016 8:36 a.m.
> *To:* Personal Submersibles General Discussion
> *Subject:* Re: [PSUBS-MAILIST] CAD for presentation
>
> Does anyone know if Vaseline will harm rubber O rings?
> Rick
>
> On Tue, Jun 7, 2016 at 9:00 AM, via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
> Rick,
>
> I never did pot my VHF antenna and it works great. I did however pot my
> GPS and I just filled it with epoxy and it works great too.
>
> Thank you,
> Scott Waters
>
> >  -------Original Message-------
> >  From: Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org>
> >  To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> >  Subject: Re: [PSUBS-MAILIST] CAD for presentation
> >  Sent: Jun 07 '16 13:05
> >
> >  I would like to find out from anyone who has an external VHF antenna
> >  how they potted what looks like a filter at the base of the antenna.
> >
> >  Rick
> >
> >  On Sat, Jun 4, 2016 at 3:25 AM, Alec Smyth via Personal_Submersibles
> >  <personal_submersibles at psubs.org> wrote:
> >
> >  > Hi everyone,
> >  >
> >  > I just got introduced to a free cloud CAD program by one of the SMEs
> >  > who is volunteering on Shackleton. The UI is very similar to a
> >  > simplified Autocad, it seems to share a lot of the same commands.
> >  > I'm sure there are limitations, but this seems to have three major
> >  > things going for it; it's not too hard, it allows online
> >  > collaboration between multiple designers because its in the cloud,
> >  > and its FREE.
> >  >
> >  > https://www.onshape.com/
> >  >
> >  > Best,
> >  >
> >  > Alec
> >  >
> >  > On Fri, May 27, 2016 at 10:23 PM, Michael Holt via
> >  > Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> >  >
> >  >> I have Delftship, a freebie but apparently comprehensive thing
> >  >> intended for surface ship design. (It was originally called
> >  >> Freeships, I think.) I have never been able to us it because the
> >  >> manual is damn near incomprehensible (it doesn't use some of the
> >  >> terminology I'm accustomed to seeing). If anyone can get it to
> >  >> do something useful, send me a personal message!
> >  >>
> >  >> Mike
> >  >>
> >  >> ---
> >  >> This email has been checked for viruses by Avast antivirus
> >  >> software.
> >  >> https://www.avast.com/antivirus
> >  >>
> >  >> _______________________________________________
> >  >> Personal_Submersibles mailing list
> >  >> Personal_Submersibles at psubs.org
> >  >> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> >  >
> >  > _______________________________________________
> >  > Personal_Submersibles mailing list
> >  > Personal_Submersibles at psubs.org
> >  > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> >
> >
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160609/01b6c5b3/attachment-0001.html>