[PSUBS-MAILIST] electrical pass-thru

[hank pronk via Personal_Submersibles]

Brian,That is a Sean type question, but I do have a 1 inch thick pen plate that came with Gamma.  Why spend the money on aluminum, just for machining.  I made mine in a flash with 516-70.  I made mine from a cut out from a ring I had cut, 1 inch thick.  You could have it water jet cut, then you just have to face it.Hank 

    On Tuesday, November 1, 2016 8:25 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Hank,    I'm planning on running my electrical power and control through one of my viewports .  My plan was to remove the window and put a piece in there that would be the same size as the acrylic window( 1 1/2" thick), I was thinking of using a 1 1/2" thick piece of aluminum just because it would be easier to machine.   I might need to have it anodized I guess, but can you think of any reason there would be an issue using aluminum ? Brian
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161102/ffa2841a/attachment.html>