[PSUBS-MAILIST] Scuba pillar valve fitting

emile via Personal_Submersibles personal_submersibles at psubs.org
Mon Nov 14 10:31:21 EST 2016


James,

 

The conical ones seal with PTFE tape. The straight ones with a o-ring. In both cases no specific torque.

 

Warning to all: There are bottles with 3/4”BSP while the new valves have M25x2 thread. It fits but has far too much play. Some people got injured when the valve blew out..

 

Br, Emile

 

Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] Namens James Frankland via Personal_Submersibles
Verzonden: maandag 14 november 2016 15:17
Aan: Personal Submersibles General Discussion
Onderwerp: [PSUBS-MAILIST] Scuba pillar valve fitting

 

Does anyone know if there is any specific torque required to fit a scuba tank pillar valve for an ordinary 220bar air tank? Any ptfe or thread sealant required?


Thanks
james

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161114/2e4e0c5c/attachment.html>


More information about the Personal_Submersibles mailing list