[PSUBS-MAILIST] Looking at starting up a Submersible project

[emile via Personal_Submersibles]

Welcome Ludwig,

 

Good point to make a sgt.Peppers a little bigger.  I rebfit it and dived with the sgt. Peppers. For both is 560 mm a bit cramped. 650-700 mm hull dia would be fine. Easy to make is capable for 300 ft.

Always good to look to K250 or other plans  to make a start.

 

Regards, Emile van Essen

 

Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] Namens via Personal_Submersibles
Verzonden: maandag 21 november 2016 1:58
Aan: personal_submersibles at psubs.org
Onderwerp: [PSUBS-MAILIST] Looking at starting up a Submersible project

 

Hello all, 

 

I'm looking into building a one person submersible next year but need some help getting started.  

 

The plane is to build it around the size of the Sgt. Peppers submersible but a little bigger.  (I want it smaller than the K-250).  Also I'm looking at having a working depth at around 150-200 feet.  Any suggestions on where to get started?  Should I by the plans for the K-250 and make it smaller?

 

I don't know if it helps or not but I'm located in Lawrence, Kansas.  

            (And I won't be the first person to build a submersible in Kansas because it looks like that there's a man (Scott Waters) from Salina, KS that built a k-350.)

 

If you guys have any questions, I would be happy to answer those for you.

 

Thanks,

Ludwig Johanning

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161121/b406c412/attachment.html>