[PSUBS-MAILIST] Test chamber

[via Personal_Submersibles]

Emile,

Can you let me know if you can and the size, pressure rating, and cost?

Thank you,
Scott Waters

>  -------Original Message-------
>  From: emile via Personal_Submersibles <personal_submersibles at psubs.org>
>  To: 'Personal Submersibles General Discussion' <personal_submersibles at psubs.org>
>  Subject: Re: [PSUBS-MAILIST] Test chamber
>  Sent: Sep 09 '16 07:24
>  
>  I can get my hands on such a test chamber. But don’t know the excact
>  size and pressure.  The walls are ok with  about 2”but don’t know
>  if the closure will hold 350 Bar.
>  
>  Emile
>  
>  VAN: Personal_Submersibles
>  [mailto:personal_submersibles-bounces at psubs.org] NAMENS hank pronk via
>  Personal_Submersibles
>  VERZONDEN: vrijdag 9 september 2016 13:54
>  AAN: Personal Submersibles General Discussion
>  ONDERWERP: Re: [PSUBS-MAILIST] Test chamber
>  
>  Scott,
>  
>  How did you make out with a HP test chamber
>  
>  Hank
>  
>  On Thursday, September 1, 2016 12:54 PM, Scott Waters via
>  Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>  
>  I need to buy or make a testing chamber for testing parts for Pisces
>  VI. It needs to go up to 5,000 psi. I need to to be 24" diameter and
>  36" long or bigger. Something pre-made and as low cost as possible is
>  prefered, but I am assuming I will have to make it. Any suggestions?
>  
>  Thank you,
>  
>  Scott Waters
>  
>  Sent from my U.S. Cellular® Smartphone
>  
>  _______________________________________________
>  Personal_Submersibles mailing list
>  Personal_Submersibles at psubs.org
>  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>  
>  -------------------------
>  _______________________________________________
>  Personal_Submersibles mailing list
>  Personal_Submersibles at psubs.org
>  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>