[PSUBS-MAILIST] High Pressure Pump

[hank pronk via Personal_Submersibles]

Alan,A pressure washer pump could work, the brass body with rubber plungers should handle salt water.  I have also looked for a 12V hp pump with no luck.Hank 

    On Tuesday, April 25, 2017 2:12 AM, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Hi,
I've been searching for a high pressure marine water pump over 500psi
with view of using it on my trimming system & compensating system, 
but haven't had much luck.
I want to be able to pump water out at 500 ft to adjust the buoyancy. 
The 500psi is for a bit of redundancy. An additional thought was that I 
could have a valve on it to operate a drop weight mechanism.
Anybody know of any such animal in existence thanks.
Alan


Sent from my iPad
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170425/351c746d/attachment.html>