[PSUBS-MAILIST] 3 phase power

[Marc de Piolenc via Personal_Submersibles]

There's an old trick using a 3-phase motor as a converter. I will dig it 
up out of my archives if you don't already know it.

Best,
Marc

On 8/5/2017 12:14 AM, hank pronk via Personal_Submersibles wrote:
> Hi All,
> I need some input on converting single phase power to 3 phase.  I am 
> thinking about going with a rotary phase converter for the two small 
> motors on the lathe.  I am not sure though if my 208 V motors can handle 
> 220-240 volt power.  I need to check my power source but it will be at 
> least 220 I am guessing.  Maybe I need to use an inverter with variable 
> output power if that exists?
> Hank
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 

-- 
Archivale catalog: http://www.archivale.com/catalog
Polymath weblog: http://www.archivale.com/weblog
Translations (ProZ profile): http://www.proz.com/profile/639380
Translations (BeWords profile): http://www.bewords.com/Marc-dePiolenc
Ducted fans: http://massflow.archivale.com/