[PSUBS-MAILIST] (no subject)

[hank pronk via Personal_Submersibles]

 AlanThanks'  no that is how it will stay.  The arm members have to be off set because I can't put two actuators in front of each other.  These actuators are real nice but they won't last if they pull.  That is fine, there are lots of folding cranes with off set booms.  There is a bit of flex in the second stage of the arm but I can add some meat to the joint and it will be good.  Hank
    On Wednesday, December 6, 2017, 3:44:12 PM MST, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Great work Hank,so will you eventually move the actuator in to a U channel to getthings to line up?Alan

Sent from my iPad
On 7/12/2017, at 11:16 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


 Hi All,Here is part two of the arm build.  The hand is on and the wrist rotates but not under power yet. Hank
   ----- Forwarded Message ----- From: xxx xxxxx <mp13 at live.ca>To: hanker_20032000 at yahoo.ca <hanker_20032000 at yahoo.ca>Sent: Wednesday, December 6, 2017, 3:13:45 PM MSTSubject: 
  https://www.youtube.com/watch?v=Cmon2a3bM-s
<Image 2017-12-06 at 3.13 PM.jpeg>
  

<Image 2017-12-06 at 3.13 PM.jpeg>

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171206/7bf44b5e/attachment.html>