[PSUBS-MAILIST] S101

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Tue Feb 21 17:23:56 EST 2017


Rick,Regardless if you use an elbow or nipple it is the same deal.  Even a valve with a male pipe end on it could break off.  To my mind, if you can keep the valve tight to the hull it is less likely to get knocked off and is safer.Hank 

    On Tuesday, February 21, 2017 3:18 PM, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Just wanted some feedback on something I would like to do. I wanted to put a 90 degree elbow on all my threaded threw hulls first and then attach all my hull stop valves to it to try and keep all the plumbing closer against the hull for a little bit more room inside. I imagine it isn't ABS approved but would this be a bad idea? The weak link of course would be the elbow.
Rick
On Sun, Feb 19, 2017 at 6:05 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Wow the S101 diesel sub is down to 135K and looking for offers.  That is pretty darn good, and what a nice machine!Hank
______________________________ _________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs. org
http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles




_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170221/5429ed0b/attachment.html>


More information about the Personal_Submersibles mailing list