[PSUBS-MAILIST] Pressure Test Chamber

[hank pronk via Personal_Submersibles]

Alan,Both will work,  slick idea!Hank 

    On Tuesday, June 20, 2017 7:00 PM, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 I am making a plastic container to fill with water & stand inside my
pressure chamber. There is a gap between the wall of the container
& the chamber which I intend to fill with oil. There will be about an
inch of air at the top of the chamber & I'm using a scuba tank to
pressurise the unit up to 3000psi.
Will car engine oil do to fill the gap between my plastic container &
the chamber wall, or do I need to go with a hydraulic fluid.
Am using the plastic container to keep water from rusting my test
chamber. (Aussie Steve's idea)
Cheers Alan

Sent from my iPad
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170621/43f5d416/attachment.html>