[PSUBS-MAILIST] test pool

[Gregory Snyder via Personal_Submersibles]

Here! Here!  
Hank ( and maybe Phil too)

> On Jun 27, 2017, at 8:40 PM, Pete Niedermayr via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> I propose Psubs.org new motto "Be Like Hank ! ".
> --------------------------------------------
> On Tue, 6/27/17, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Subject: [PSUBS-MAILIST] test pool
> To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
> Date: Tuesday, June 27, 2017, 8:11 PM
> 
> Hi
> All,Renovations
> on my new house are going so well that I can start
> renovating my new old shop.  I built it 20 years ago so
> it needs a bit of help.  I am replacing the wood centre
> beam with a steel I beam so I can lift and roll subs with a
> beam trolly.  And the biggy is, the test pool at the
> end of the steel beam.  I am installing an in floor
> pool.  I am tired of driving for 1.5 hr to do a 5
> minute test then drive home for 1.5 hr.  I happen to be
> in the concrete cutting business also , so I can cut out the
> floor easy as pie.  I will make the pool walls with
> styrofoam blocks filled with concrete, (ICF)  so the
> sub will bump into soft walls.  So when it is -20C
> outside I can go for a little sub dive.   Hank_______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles