[PSUBS-MAILIST] test pool

[Alan via Personal_Submersibles]

Hank, 
when you said you weren't doing anything submarine for a year
I had my doubts. Below is an image that may help you in your
new indoor submarine pool design.
Alan
 

Sent from my iPad

> On 28/06/2017, at 1:11 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi All,
> Renovations on my new house are going so well that I can start renovating my new old shop.  I built it 20 years ago so it needs a bit of help.  I am replacing the wood centre beam with a steel I beam so I can lift and roll subs with a beam trolly.  And the biggy is, the test pool at the end of the steel beam.  I am installing an in floor pool.  I am tired of driving for 1.5 hr to do a 5 minute test then drive home for 1.5 hr.  I happen to be in the concrete cutting business also , so I can cut out the floor easy as pie.  I will make the pool walls with styrofoam blocks filled with concrete, (ICF)  so the sub will bump into soft walls.  So when it is -20C outside I can go for a little sub dive.  
>  
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170628/5ab91341/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 83434 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170628/5ab91341/attachment-0001.jpeg>