[PSUBS-MAILIST] building sonar transducer
personal_submersibles at psubs.org
Sun Mar 5 14:07:36 EST 2017
Currently, I'm looking at a 100 foot operating depth with 100 foot depth range with sonar.
From: Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org>
To: 'Personal Submersibles General Discussion' <personal_submersibles at psubs.org>
Sent: Sun, Mar 5, 2017 12:14 pm
Subject: Re: [PSUBS-MAILIST] building sonar transducer
Hello Ludwig, It would help to know what depth you want to obtain.
From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of via Personal_Submersibles
Sent: Sunday, March 5, 2017 11:17 AM
To: personal_submersibles at psubs.org
Subject: [PSUBS-MAILIST] building sonar transducer
I'm looking at building a sonar transducer to measure bottom depth for a small ROV project and would like to ask how I should go about pressure-proof/waterproof the system.
I'm looking at building it with a Arduino Uno Rev 3 microcontroller and a Ultrasonic sensor module.
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Personal_Submersibles