[PSUBS-MAILIST] WD - 40

[MerlinSub@t-online.de via Personal_Submersibles]

Heat Vapor is may a problem with WD40.
May ensure that the compensating back is big to handle that..
We change to silicon oil for that reason.
 
vbr Carsten
 
 
 
-----Original-Nachricht-----
Betreff: [PSUBS-MAILIST] WD - 40
Datum: 2017-03-28T04:56:46+0200
Von: "Brian Cox via Personal_Submersibles" 
<personal_submersibles at psubs.org>
An: "PSubs" <personal_submersibles at psubs.org>
 
 
 
I just ran one of my motors filled with the WD40.  It seemed to be very 
happy.  I mainly just did it to clean the carbon build up out of the motor. 
 I was surprised how sealed the motor was, it is open at one end where it 
mates to the gear box.  I was able to fill it up without it leaking out 
anywhere.  That could be an issue later when I want the mineral oil to fill 
all the voids.  I might need to actually drill some holes to get some 
circulation . 
 
 
Brian 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170328/8a9cac29/attachment.html>