[PSUBS-MAILIST] Penetrator materials

[Pete Niedermayr via Personal_Submersibles]

Are there any standards regarding electrical penetrators (battery pod to pressure hull) ie electrode diameter,insulator thickness ?   
--------------------------------------------
On Wed, 5/17/17, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Penetrator materials
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Date: Wednesday, May 17, 2017, 7:08 PM
 
 Thanks
 Sean,I filed
 a conical penetrator design, but had forgotten about
 it!Alan
 
 Sent from my iPad
 On
 18/05/2017, at 9:28 AM, Sean T. Stevenson via
 Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 
 If you machine the
 hole through the penetrator as a conical cavity rather than
 cylindrical, and then use a potting epoxy with some
 compliance / flexibility, the pressure acting to push the
 potting compound into the hole will also develop some
 increased compressive force around the electrodes.
 Sean
 
 
 
 
 On May 17, 2017 1:55:51 PM
 MDT, Alan via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 Hank,If
 I cover everything with the glue & then the
 polyurethane, I won't need to rely onthe epoxy for sealing.
 If the cable was cut then the system would rely on the
 epoxyas a
 back up. At that stage I could put up with a temporary
 dribble; the electrics wouldbe shorting out as
 well. I will be wary of stripping back enough of the wiring
 sheath,but
 failure can also occur between the epoxy & wall of the
 penetrator.Cheers Alan
 
 Sent
 from my iPad
 On 18/05/2017, at
 12:02 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 
 Alan,That
 is not correct, the epoxy will not stop the water past 1,000
 psi completely.    If the wires are stripped back
 further so the sealant creates an extra layer against
 t_______________________________________________
 Personal_Submersibles mailing
 list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles