[PSUBS-MAILIST] SeaQuestor CNC begins

[David Colombo via Personal_Submersibles]

Thanks Alec,
I've been learning Rhino, and doing a lot of visualizations with the 3d
model, and making refinements to the form, and developing models of
different parts.  I finally decided I had fiddled with it enough,  and
needed a full scale to make sure things were actually working. So now I get
to build a giant tinker toy and sit in it. Yah. More videos to come as I
progress.
On Oct 8, 2017 7:42 AM, "Alec Smyth via Personal_Submersibles" <
personal_submersibles at psubs.org> wrote:

> That's the way to do it... if I were on day one of this endeavor, I would
> start by becoming a CAD expert and then try to use all the CNC fabrication
> techniques instead of my dinosaur methods. Great job David, I can't wait to
> see this one come together!
>
> Best,
>
> Alec
>
> On Sun, Oct 8, 2017 at 3:20 AM, David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>> Hi Guys,
>> We just CNC'd the station ribs for the full scale mock-up of the
>> SeaQuestor. Nest step is to assemble the puzzle on a rolling platform to
>> start all of the electrical and plumbing rough-ins.
>>
>> https://youtu.be/XiWSaSF6UT0
>>
>> Best Regards,
>> David Colombo
>>
>> 804 College Ave
>> Santa Rosa, CA. 95404
>> (707) 536-1424
>> www.SeaQuestor.com
>>
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171008/6923e23c/attachment.html>