[PSUBS-MAILIST] Heads Question

Alec Smyth via Personal_Submersibles personal_submersibles at psubs.org
Fri Sep 15 17:25:38 EDT 2017


Hi Roberto,

I believe the short description for what you need is flanged, beveled, and
code. You could get them unflanged, but it takes quite a while to make a
flange with an angle grinder. The flanges if I recall are 2". Do set up a
project page or something so we can follow progress!


Best,

Alec

On Fri, Sep 15, 2017 at 5:07 PM, roberto alvarez via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi, lost the plans cd for the k250, i am  interested in the  head
> selection, i found a seler in california and have
> flanged ,beveled ,code, non code,
>
> Will apreciate your support in this ( until i found the plans cd )
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170915/125c899e/attachment.html>


More information about the Personal_Submersibles mailing list