[PSUBS-MAILIST] Heads Question

David Colombo via Personal_Submersibles personal_submersibles at psubs.org
Sat Sep 16 12:16:50 EDT 2017


Hi Alec,
I just spoke with the company that Roberto mentioned here in California to
place an order for dished head for the SeaQuestor. I will be using the
36"OD x .375 A516-70 steel what they call Elliptical 2:1 Ratio ASME Code
Type. It comes with a 2" flange which is really a 36" od ring shape as part
of the forming. This would mate up to the 36"OD first hull section. I'm
thinking that this would give me the best welding condition with two
matched surfaces that I would bevel for full pen welding. I'm curious why
not to have the flange?   My cost here is $480.00 + $96 to have it shipped
to northern California from southern California. even though its only a
nine hour drive one way, I think my time would be worth more than $5 hr to
pick it up. LOL Unless of course its cheaper in Canada (Hank), I might make
the trip and could serve as support crew for the Gamma. Any thoughts out
there from fellow Psubers would be appreciated.

Best Regards,
David Colombo

804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com


On Fri, Sep 15, 2017 at 2:28 PM, Alec Smyth via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Ugh, mental typo. I meant "un-beveled" and "bevel them yourself", not
> "un-flanged" and "flange them yourself".
>
> !!!!!!!
>
> On Fri, Sep 15, 2017 at 5:25 PM, Alec Smyth <alecsmyth at gmail.com> wrote:
>
>> Hi Roberto,
>>
>> I believe the short description for what you need is flanged, beveled,
>> and code. You could get them unflanged, but it takes quite a while to make
>> a flange with an angle grinder. The flanges if I recall are 2". Do set up a
>> project page or something so we can follow progress!
>>
>>
>> Best,
>>
>> Alec
>>
>> On Fri, Sep 15, 2017 at 5:07 PM, roberto alvarez via
>> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>>
>>> Hi, lost the plans cd for the k250, i am  interested in the  head
>>> selection, i found a seler in california and have
>>> flanged ,beveled ,code, non code,
>>>
>>> Will apreciate your support in this ( until i found the plans cd )
>>>
>>> _______________________________________________
>>> Personal_Submersibles mailing list
>>> Personal_Submersibles at psubs.org
>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>>
>>>
>>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170916/de97920c/attachment-0001.html>


More information about the Personal_Submersibles mailing list