[PSUBS-MAILIST] absorbent dust (hank pronk via Personal_Submersibles)

[hank pronk via Personal_Submersibles]

 Thomas,Thank you!  I like it!  Hank
    On Sunday, September 17, 2017, 5:02:12 PM MDT, Thomas Dijkshoorn via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hi Hank, 

This issue comes up a lot with rebreather divers too. Simplest way of tackling this is by pouring the sorb outside into the filling canister from about 40cm high. Be sure to do this outside with a slight breeze or outside whilst running a fan trough the stream.

Simple but effective!

Thomas
> 
> 
> Message: 1
> Date: Sun, 17 Sep 2017 01:11:47 +0000 (UTC)
> From: hank pronk via Personal_Submersibles
>    <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion
>    <personal_submersibles at psubs.org>
> Subject: [PSUBS-MAILIST] absorbent dust
> Message-ID: <1454055750.931577.1505610707026 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
> 
> Hi All,When I fill my scrubber with absorbent, I find it very dusty. ?I had to add a radial filter on my scrubber to capture this dust. ?What is the procedure to get rid of this dust? ?It would really suck to have to refill the scrubber inside the sub.Hank
> -------------- next part -----------

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170917/bc36b504/attachment.html>