[PSUBS-MAILIST] (no subject)

[Alan via Personal_Submersibles]

Tim,
unsettled weather at the moment, but I've managed to get 
a few swims in. Part of the reason I am testing the motor on an inflatable
is because of competition for the swimming pool my test rig was set up in.
Alan


> On 20/12/2018, at 6:30 PM, T Novak via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> I suggest that for the lure you go with the cockroach again.
> I trust that you are having a good summer.  Wish we were there.
> Tim
>  
> From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of Alan via Personal_Submersibles
> Sent: Wednesday, December 19, 2018 9:03 PM
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] (no subject)
>  
> Tim,
> true, I am at it as we speak!
> Below is my thruster project. At the moment I have connected a bluetooth module to the Vesc motor controller & are trying to get a stack of motor & esc data from the esc to an app on my android phone, but are struggling! When I am successful I can put the rig on my inflatable & spend hours testing it out while trolling a fishing lure.
> Alan
> <image001.jpg>
> 
> On 20/12/2018, at 4:43 PM, T Novak via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Sure, Alan, we know only one subber who builds submarines in his kitchen.
>  
> From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of Alan via Personal_Submersibles
> Sent: Wednesday, December 19, 2018 6:04 PM
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] (no subject)
>  
> Hank,
> is that your family on the table?
> Alan
> 
> On 20/12/2018, at 11:15 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi All,
> Here is a picture of my new air powered MBT vent valves.  I was inspired by Alec's valves.  The blue part is bolted to the outside of the MBT with the air cylinder inside the MBT .  When air pressure is applied the air cylinder pushes itself away from the blue vent disk.  Very simple to make and cheap.
> Hank
>  
> ----- Forwarded Message -----
> From: hank pronk <hanker_20032000 at yahoo.ca>
> To: hank pronk <hanker_20032000 at yahoo.ca>
> Sent: Wednesday, December 19, 2018, 3:10:08 PM MST
> Subject:
>  
>  
>  
> 
> 
> Sent from my iPhone
> <IMG_0250.jpg>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20181221/c959582b/attachment.html>