[PSUBS-MAILIST] O2 question

[emile via Personal_Submersibles]

Brass/bronze and monel is often used with O2. 

 

Steel burns very well with oxygen.

 

Emile

 

Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] Namens Brian Cox via Personal_Submersibles
Verzonden: zaterdag 3 februari 2018 18:02
Aan: Personal Submersibles General Discussion
Onderwerp: Re: [PSUBS-MAILIST] O2 question

 

Would tubing other than stainless steel be a fire risk ?

--- personal_submersibles at psubs.org wrote:

From: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
To: "PSubs " <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] O2 question
Date: Fri, 2 Feb 2018 12:27:18 -0800

Hi Everybody,   

 

             On my O2 regulator and my O2 flow meter I have barbed fittings,  I assumed that I would put some type of rubber hose on there, but now I'm wondering if that may not be kosher.  What is the story on that ?  I would just need a very short piece to go from the regulator to the flow meter.  I will have a O2 tank in my cabin for the time being.   Also I did get the electronic flow controller that Cliff recommended, but am not ready to do that yet.  

 

Brian 

 

_______________________________________________ Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180203/5d42cf87/attachment.html>