[PSUBS-MAILIST] LED light

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Mon Feb 19 14:14:56 EST 2018


 Rick, I will send you a picture, it is also on Facebook.  I took a regular LED light that goes on top of an off road truck, then took the internal components, witch is a long circuit board and slid it inside an acrylic tube.  Then capped one end with power wires potted, the other end is a rubber connector with a plug to act as a compensator.  The whole thing is fill with vegetable oil.Hank
    On Monday, February 19, 2018, 12:10:51 PM MST, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hank
Do you have any pictures of the light you just tested? are you running it off a buck booster and a PWM/Rick
On Mon, Feb 19, 2018 at 8:36 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

HI All, I sent an earlier post with picture and doubt it made it.  I have just tested my LED light internal components to 1,500 psi and the light works fine still.  So there is no need for pressure housings with LED lights, the components can handle at least 3,000 feet.Hank
______________________________ _________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs. org
http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles



_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180219/65e7f15a/attachment.html>


More information about the Personal_Submersibles mailing list