[PSUBS-MAILIST] Scrubber

[Alec Smyth via Personal_Submersibles]

Brian, it looks great and the creativity of using a pasta strainer and
patio heater is vintage PSUBS. But how do you fill it? Normally the inside
cylinder would be attached to the bottom of the outside cylinder, leaving a
space between the two for you to pour in the granules. If the inside
cylinder is attached to the lid, you would need to squish the granules out
of the way when pushing the inside cylinder in. I think you might find it a
bit more convenient to just unscrew the inside cylinder from the lid and
bolt it to the bottom instead. You can also make yourself an annular sponge
to put between the top of the granules and the lid. They will settle, and
there should be no air gap between granules and lid.

Best,
Alec

On Mon, Jan 8, 2018 at 3:35 PM, Brian Cox via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> All,
>                    Got my scrubber ready to go!   Here are some pics.
> Outside is made from the screen that goes on those outdoor patio heaters,
> inside is a pasta strainer.  Blower is the a 7.5W 12 volt and the cover is
> made from Starboard.
>
>
> Brian
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180108/83cc072c/attachment.html>