[PSUBS-MAILIST] Small ballast tanks anyone?

[Steve McQueen via Personal_Submersibles]

Alec, depending on my place in the queue I would be interested in 4. My thought is for future K-250 saddle tanks.
Thanks,
Steve

---- Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote: 
> Hi David,
> 
> Certainly, but could you send me your email pls? Mine is alecsmyth at gmail.com.
> The email list hides our addresses.
> 
> 
> Thanks,
> Alec
> 
> On Mon, Jan 29, 2018 at 4:13 PM, David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
> 
> > Hi Alex, do you have any photos. I might be able to use them.
> >
> > On Jan 29, 2018 12:58 PM, "Alec Smyth via Personal_Submersibles" <
> > personal_submersibles at psubs.org> wrote:
> >
> >> Hi everyone,
> >>
> >> Due to a design change in Shackleton, I've got a dozen aluminum tanks to
> >> get rid of. They're good quality, originally off a military vehicle.
> >> There's 1/2" NPT nozzles at both ends on the heads as well as at the ends
> >> of the cylinder. I have the end cap nipples plugged and the ones on the
> >> cylinder are for the air to escape. Also I welded an aluminum pipe into the
> >> cylinder to allow venting and flooding, and which acts as a downspout to
> >> prevent burping. These tanks are 9.5" in diameter, 28" long, and provide 68
> >> lbs of buoyancy each.  I can see them being used as auxiliary saddle tanks
> >> on a K250, or a raft MBT built up from several small tanks. Twenty bucks
> >> and shipping perhaps?
> >>
> >> Best,
> >> Alec
> >>
> >>
> >>
> >> _______________________________________________
> >> Personal_Submersibles mailing list
> >> Personal_Submersibles at psubs.org
> >> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> >>
> >>
> > _______________________________________________
> > Personal_Submersibles mailing list
> > Personal_Submersibles at psubs.org
> > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> >
> >