[PSUBS-MAILIST] SeaQuestor Fabrication

Sat Jun 16 05:08:51 EDT 2018

 David,Very nice to see.Hank
    On Friday, June 15, 2018, 8:33:58 PM MDT, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  

 Hi Guys, 
Well after many years of planning and talking and sketching and engineering The SeaQuestor is finally under construction. While my Youtube channel is under construction as well I'm not supposed to let the cat out of the bag so to speak, but I figured that did not include my Psub Community. All pressure hull parts were cut on the plasma cadcam table last week and the first hull section was bump and rolled. Friday we will be shaping the cone section of the hull and the sails. The ASME welding shop is prepping for the parts arrival in the next couple of weeks for fit and finish and lots of welding. Stay tuned for videos of the complete build process once we launch the SeaQuestor Youtube channel.

Best Regards,
David Colombo

804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180616/d9f77796/attachment.html>