[PSUBS-MAILIST] SeaQuestor Fabrication

[T Novak via Personal_Submersibles]

Looks great, David.  No stopping now!

Tim

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of David Colombo via Personal_Submersibles
Sent: Friday, June 15, 2018 7:34 PM
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] SeaQuestor Fabrication

 

Hi Guys, 

Well after many years of planning and talking and sketching and engineering The SeaQuestor is finally under construction. While my Youtube channel is under construction as well I'm not supposed to let the cat out of the bag so to speak, but I figured that did not include my Psub Community. All pressure hull parts were cut on the plasma cadcam table last week and the first hull section was bump and rolled. Friday we will be shaping the cone section of the hull and the sails. The ASME welding shop is prepping for the parts arrival in the next couple of weeks for fit and finish and lots of welding. Stay tuned for videos of the complete build process once we launch the SeaQuestor Youtube channel.

 

 

Best Regards,
David Colombo

804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com <http://www.SeaQuestor.com> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180616/2171218c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 594 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180616/2171218c/attachment-0001.jpg>