[PSUBS-MAILIST] attaching wires

[Alec Smyth via Personal_Submersibles]

There are some little aluminum safety locks for sliding doors that attach
nicely to the stiffener flanges. I replaced the hand screws for set screws
and drilled a hole to attach the wiring harness with a cable tie.

https://goo.gl/images/tbmWNs


Best,
Alec

On Sat, May 12, 2018 at 6:55 PM, Rick Patton via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> I am running wires all over the place and was wondering how people are
> securing their wires to the hull. I have welded a couple of small stainless
> steel eyes to tie wire to but a real pain.
>  I also would rather not drill any holes into my T bar frames. I was
> wondering if I could find small plastic eyes with adhesive on them if they
> would stay stuck to paint for a long time??
>
> Rick
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180513/671b073f/attachment.html>