[PSUBS-MAILIST] compass

Alan via Personal_Submersibles personal_submersibles at psubs.org
Wed Oct 31 19:28:57 EDT 2018


Brian,
no. I was referring to Jon's earlier comments that he was in
the Florida Keys till December. 
My neighbour is travelling around there at the moment. I think
he said he'd been 22 times! 
Alan

> On 1/11/2018, at 12:12 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Alan,   Are you in the states ?
> 
> Brian
> 
> 
> 
> --- personal_submersibles at psubs.org wrote:
> 
> From: Alan via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] compass
> Date: Thu, 1 Nov 2018 10:20:48 +1300
> 
> Jon,
> thanks for that. On holiday in Florida keys till December, that's pretty cool.
> I googled & found this item CMPS12 for US $29.90
> https://www.robotshop.com/en/tilt-compensated-magnetic-compass-cmps12.html
> documentation...
> https://www.robot-electronics.co.uk/files/cmps12.pdf
> There are some good reviews on it. One from a guy that is using it on a rov.
> Any opinion on this? 
> Hank will need to display the compass on a screen of some sort.
> If he is buying some sort of HMI to display it he may as well have his other 
> sensors, battery voltage etc displayed on it! He is really on a slippery slope now.
> Alan
> 
> 
> On 1/11/2018, at 4:00 AM, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Alan,
> 
> For the most part, it's about accuracy.  This device has been around for many years, it's true, but that's because the specs are very good.  It also performs all the calculations spitting out compass heading, yaw, pitch, in a directly usable format as well as being tilt compensated up to 60 degrees (I think).  It can be mounted in three different planes which isn't so important from a PSUBS perspective but could be critical in some applications.  So for basic compass purposes it is definitely a Cadillac.
> 
> There are many cheaper solid state compasses available but few are tilt-compensated and even a little bit of tilt has a major impact on the measurement output.  The tilt-compensation on the HMC-6343 really works well and it was important to me to know that the output I am seeing is as accurate as possible despite any wave action on the surface, or small balance issues under water.
> 
> Any IMU with 9 degrees of freedom can be used to accomplish the same thing but they all output raw data that needs to be calculated, twisted, torqued, torched, hacksawed, and then welded back together again.  The HMC-6343 does that all internally and is simple to configure and program.
> 
> The link I showed is a Canadian outlet so price is $188(CAD).  USA suppliers have them for $159(US) although they go into short supply occasionally.  Add on an arduino for $35 and a bit of time programming, and you have a nice accurate compass for less than $200(US).
> 
> I have mine mounted in a small 1 inch PVC pipe with caps on both ends.  I will probably fill it with epoxy but I suspect the 1-ATM pvc will hold up fine for the depths I'll be at.  And yes, it will be mounted externally, probably 3 feet or so away from the metal hull.  However, with programming I can filter any deflection offset caused by the metal hull.
> 
> Jon
> 
> From: Alan via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
> Sent: Tuesday, October 30, 2018 10:46 PM
> Subject: Re: [PSUBS-MAILIST] compass
> 
> Jon,
> I have to buy a compass some time so looked it up but it's pretty expensive
> at $188-. I also saw a video on it dated 2010, so it's at least 8 years old.
> There are modules for less than $20- but not tilt compensated.
> It does say it is "high end" but is there much difference between a cheap
> & expensive compass? ( I know nothing about this).
> The thought came to mind that you could possibly cover it with resin &
> mount it outside the hull away from magnetic interference.
> Alan
>  
> 
> On 31/10/2018, at 1:36 PM, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hank,
> 
> I use HMC6343 tilt compensated compass from Honeywell, with arduino or Raspberry pi microprocessor.  Display can be in many formats.  These are sometimes hard to get but looks like CANAKIT has some.
> 
> Compass with Tilt Compensation - HMC6343
> 
> 
> Compass with Tilt Compensation - HMC6343
> Compass with Tilt Compensation - HMC6343
> 
> 
> 
> 
> From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
> To: irox via Personal_Submersibles <personal_submersibles at psubs.org> 
> Sent: Monday, October 29, 2018 10:48 PM
> Subject: Re: [PSUBS-MAILIST] compass
> 
> Ian, 
> Thank you, sorry about the sharp bracket.  I will mount the new one on a plastic pole behind the CT
> Hank
> 
> On Monday, October 29, 2018, 6:43:07 PM MDT, irox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> 
> Hi Hank!
> 
> you could google for "Fluxgate compass" and see what you're comfortable with from an electronics point of view.
> 
> You could build your own for ~$50 ($15 for compass, ~ $10 for microcontroller, ~$20 for a display):
> https://www.adafruit.com/product/1120
> 
> But I imagine you'd prefer something more turn key, like:
> https://www.starmarinedepot.com/clipper-compass-system-w%2Fremovable-fluxgate-sensor.html
> 
> The sensor would need mounted outside, away from the hull, like a regular compass.
> 
> Cheers!
>   Ian.
> P.S.:  Please make it less sharp that the current compass mounting bracket on Gamma. :-)
> 
> -----Original Message----- 
> From: hank pronk via Personal_Submersibles 
> Sent: Oct 29, 2018 5:23 PM 
> To: Personal Submersibles General Discussion 
> Subject: [PSUBS-MAILIST] compass 
> 
> Hi All,
> It is time to deal with a compass for Gamma.  I would like a solid state compass with no moving parts.  Jon, I think you mentioned I could do something for 200 dollars?  Any ideas are welcome.
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________ Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20181101/fd10ee99/attachment-0002.html>


More information about the Personal_Submersibles mailing list