[PSUBS-MAILIST] SeaQuestor progress.

[David Colombo via Personal_Submersibles]

Hi Brian, the foam is just to build the mold. I plan to use a different
foam for flotatation as needed. Probably the same material that Alec is
using on the Shackelton.
David

On Sat, Jan 5, 2019, 5:06 PM Brian Cox via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> David is that foam pressure resistant ?
>
> Brian
>
>
> --- personal_submersibles at psubs.org wrote:
>
> From: David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: [PSUBS-MAILIST] SeaQuestor progress.
> Date: Sat, 5 Jan 2019 16:30:47 -0800
>
> Hi guys, I aquired 380cf (4) 4ft x 3ft x 8ft blocks of foam for the
> exoskeleton shaping process. First I need to build the platform for the
> (16) station ribs to be attached at 12" o.c. The station ribs have been cnc
> cut from 3/4" plywood and are hanging on the wall ready to be assembled.
> Then build a hot wire cutting rig to slice the foam into 11.25" wide
> blocks. Then the shaping process can begin.
> David
> --0000000000001266be057ebf3a1d--_______________________________________________
> Personal_Submersibles mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190105/b70113b4/attachment.html>