[PSUBS-MAILIST] Sonar thru hull wiring

[hank pronk via Personal_Submersibles]

 Brian,I did a simple splice with shrink tube and it works good.  I have found the accuracy is off with long distances but very good up close.Hank
    On Saturday, June 22, 2019, 4:13:35 AM MDT, Brian Hughes via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
  Likely this has been covered in the past, but ...

Upgrading to a Chirp style sonar. Any suggestions/experience in signal isolation as the wiring goes through the hull? Everything I've found on cutting and altering the transducer wiring recommends covering with splice with foil to maintain the isolating field around the signal. How does one do that in our applications?  Or does it matter?

Brian
Harold the Submarine
Maude the Porte Bote 

Get Outlook for Android
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190622/70ae5b20/attachment.html>