[PSUBS-MAILIST] epoxy

[Rick Patton via Personal_Submersibles]

Thanks Sean!
Have you used one of these in particular so you might be able to recommend
a specific one?
Rick

On Tue, Mar 12, 2019 at 8:44 AM Sean T. Stevenson via Personal_Submersibles
<personal_submersibles at psubs.org> wrote:

> Sorry, there was a typo in that link.
>
> Try this:
>
>
> https://www.mgchemicals.com/products/potting-compounds/epoxy-potting-compounds/
>
> Sean
>
>
>
> -------- Original Message --------
> On Mar 12, 2019, 12:38, Sean T. Stevenson via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
>
> https://www.mgchemicals.com/products/potting-compounds/epoxy-pottting-compounds/
>
> Sean
>
>
>
> -------- Original Message --------
> On Mar 12, 2019, 12:29, Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Can anyone recommend a good dielectric non shrinking epoxy?
> I attached my battery pods to the hull using 3 pieces of 4" schedule 80
> pipe that are about 4" long. only the aft pipe goes threw the wall of the
> pod and hull and I am using short pieces of 1/2" copper all thread that
> will protrude about 2" inside the hull and pod that I will put lugs on that
> will transfer the battery power inside the hull and I will fill the void
> between pod and hull with an epoxy to seal the two spaces in case of
> flooding or possible hydrogen explosion.
> Rick
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190312/428d41ce/attachment.html>