[PSUBS-MAILIST] Seaquestor progress

Sat Mar 30 16:21:37 EDT 2019

Looking good!

On Fri, Mar 29, 2019 at 11:58 PM David Colombo via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi guys, I've been cutting a lot of foam over the last month,  so I
> thought I would share the progress. I hope to complete the final foam
> cutting this weekend.  Next step is to replace the 3/4" plywood ribs with a
> piece of 3/4" foam. Then glue all foam into a single block and then start
> the final shaping and sanding before starting the fiberglass process. The
> final fiberglass will be cast into 5 or 6 pieces depending on the demolding
> lines. Once those parts are removed from the plug, I will be recutting the
> foam to cast the inner ballast tank parts.
> The forward canards are coming along right in line with story of the
> SeaQuestor I am developing for the interaction with children.
> Best Regards,
> David
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190330/77d4d85a/attachment-0001.html>