[PSUBS-MAILIST] Original MBT vent?

[hank pronk via Personal_Submersibles]

 Jon,For sure, an o-ring style so the pipes don't move to remove the valve.Hank
    On Thursday, June 10, 2021, 07:46:37 PM MDT, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
  What about a union?

    On Thursday, June 10, 2021, 06:34:37 PM EDT, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
  I like the simplicity of this vent valve set up. It could be built with bolt together flanges allowing for maintenance.  Stop valves should not be needed because the valve is so close to the hull, and really how much different is it to having a valve with a nipple into a penetration.   I can see it not passing but,,,,Hank

   
  _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20210611/31acc3bf/attachment.html>