[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] link

Thanks Skeet. I filed the links and will check them out.
Bill Akins.
----- Original Message -----
Sent: Sunday, February 05, 2006 1:45 PM
Subject: Re: [PSUBS-MAILIST] link

Hello Bill -
 
I am new to this sort of thing, but when you sent your last post it brought an idea to me.  If you are handy at building, perhaps you could use a kit to build your motor control.  You could then use some of the common techniques for handling pressure in its packaging.  
 
Below I have listed several links for kits to build a DC motor control.  The single direction motor control will handle motors up to 60 volts at 7.5 amps.  The bi-directional device will handle motors using 12 to 32 Volts DC @ 5 Amps.  If you can use a soldering iron, you can make one of these.
 
Best of luck,
 
Skeet Stribling
 
 
 
 
 
----- Original Message -----
From: Akins
Sent: Sunday, February 05, 2006 5:56 AM
Subject: Re: [PSUBS-MAILIST] link

I'm still trying to find a site that has VARIABLE speed controllers that are both WATERPROOF and PRESSUREPROOF for use in my wetsub.
So far no luck. Something like a motorcycle twist grip with a "dead mans" return spring would be nice, or even a simple grip lever like a motorcycle brake lever,
but at this point I would consider ANY waterproof and pressureproof variable speed switch. I may have to make one out of a light dimmer switch and pvc pipe but
it sure would be nice to just be able to buy something for a change instead of having to make everything. If any of you find something like this, please let me know.
I have searched and searched without any result. I even checked with Honeywell electronics and talked with their main variable speed switch tech, but he was unable
to locate both a waterproof and pressureproof variable switch for me, he did have lots of variable speed switches that were water "resistant" but that wouldn't do under
pressure. And yes we DID look at all his magnetic proximity switches. I could use one of them, but they are not VARIABLE in speed.
Somebody needs to manufacture a magnetic proximity, variable speed motor switch, that is both waterproof and pressureproof for wetsubbers and DPV's in general.
DPV scooters have magnetic proximity switches. Mine has one too. But they are not variable. My scooter has two switches, one for 2 mph and then I squeeze the other
one at the same time for 3 mph. But that is not variable from zero to full power. That is just on or off with another switch giving me 1 extra mph of power.
Of course if I wasn't looking for the darn thing I would see it everywhere I looked. Grin, Sigh.
Bill Akins.
 
 
----- Original Message -----
Sent: Sunday, February 05, 2006 5:24 AM
Subject: Re: [PSUBS-MAILIST] link

Steve,
 
That's a great site. especially the GUIDED FEATURES TOUR, for people like me, with limmited knowlidge of electronics.
 
Thijs Struijs      
----- Original Message -----
From: steve
Sent: Sunday, February 05, 2006 12:37 AM
Subject: [PSUBS-MAILIST] link

 
just in case it's useful to anyone...
 
www.4qd.co.uk
 
make electric vehicle speed controllers and have a sister site www.4qdtec.com with lots of good info.
pay the small subscription fee its worth it!
 
steve

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.2/251 - Release Date: 4-2-06