[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] interesting article/web page

Thanks!  The corrugated pressure hull and concave cylinder ends are pretty interesting.  If you free yourself from thinking of the pressure hull needing to be at all hydrodynamic, then it seems like a big win to have the cylinder cap under tension instead of compression.  You'd lose a little interior volume so might need to stretch the overall pressure hull length a bit to compensate.  Neat.


Paul

On 6/27/06, Vern Shurtz <Vern@vernshurtz.com> wrote:

 

Very good info. Thanx.

From: owner- personal_submersibles@psubs.org [mailto:owner- personal_submersibles@psubs.org] On Behalf Of George Slaterpryce
Sent: Tuesday, June 27, 2006 11:19 AM
To: PSUBS Mailing List
Subject: [PSUBS-MAILIST] interesting article/web page

 

I was doing some research for preasure hulls again when I came across this webpage. I thought I'd share.

 


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.5/376 - Release Date: 6/26/2006


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.5/376 - Release Date: 6/26/2006




--
still studying for the Turing test-