|
I've made mine out of PVC, warm with a heat gun and
then warp it to the shape you need.
George H. Slaterpryce III
That's MR. PIG. to you!
----- Original Message -----
Sent: Sunday, July 16, 2006 4:50 PM
Subject: RE: [PSUBS-MAILIST] Kort
nozzles
Alec,
As a coincidence, my recent foray into the homebuilt ROV, world had me come
to the same conclusion as to the difficulty of homebuilt Kort nozzles.
I was taking a quick peek at the hovercraft crowd for ideas, when I
stopped to get back to marine studies.
http://www.indstate.edu/mct/hovercraft.htm
Hope this turns into a viable lead, Doug has some leads on his website as
well.
Joe
From: "Smyth, Alec" <Alec.Smyth@compuware.com>
Reply-To:
personal_submersibles@psubs.org
To:
<personal_submersibles@psubs.org>
Subject:
[PSUBS-MAILIST] Kort nozzles
Date: Sun, 16 Jul 2006 16:04:38
-0400
I've been searching the web for a supplier of Kort nozzles,
but all I can find is custom jobs for ocean going ships. I did find
www.propguardmarine.com, but what I'm really after is known as a Marin 19A
type nozzle, in a size of around 15" ID. I would try and turn a nozzle on my
lathe, but the lathe is a couple of inches too small. Has anyone given
thought to fabrication methods for this other than machining out of solid
material?
thanks,
Alec
The contents of this
e-mail are intended for the named addressee only. It contains information
that may be confidential. Unless you are the named addressee or an
authorized designee, you may not copy or use it, or disclose it to anyone
else. If you received it in error please notify us immediately and then
destroy it.
************************************************************************
************************************************************************
************************************************************************ The
personal submersibles mailing list complies with the US Federal CAN-SPAM Act
of 2003. Your email address appears in our database because either you, or
someone you know, requested you receive messages from our organization. If you
want to be removed from this mailing list simply click on the link below or
send a blank email message to: removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an automated
process and should be complete within five minutes of our server receiving
your request. PSUBS.ORG PO Box 311 Weare, NH 03281 603-529-1100
************************************************************************
************************************************************************
************************************************************************
|