[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PSUBS-MAILIST] Sonar Transparent
The powerpoint presentation is available at
http://www.psubs.org/convention/2004/
----- Original Message -----
From: "Ian Roxborough" <irox@ix.netcom.com>
To: <personal_submersibles@psubs.org>
Sent: Tuesday, August 01, 2006 8:51 AM
Subject: Re: [PSUBS-MAILIST] Sonar Transparent
>
> Hi George, I encourage you to contact Gary even if you get some ideas
> from the board. He did a sonar presentation at psub convention one
> year, it was very good. Maybe there is a DVD avaliable for that year.
>
> My thoughts are find out what type of plastic (or metal) is used on
> the fish finder and use that. I'd guess it would be nylon or bass.
>
> Cheers,
> Ian.
>
> On Tue, 1 Aug 2006 11:36:24 -0400
> "George Slaterpryce" <gslaterp@hotmail.com> wrote:
>
> > I feel kind of odd cold-emailing someone... I'll see what pans out here
before I do so. But I'll Definatley contact him if the boards are dry. Thank
you VERY much for the refernce.
> >
> >
> > George H. Slaterpryce III
> > ----- Original Message -----
> > From: Cliff Redus
> > To: personal_submersibles@psubs.org
> > Cc: Gary Boucher
> > Sent: Tuesday, August 01, 2006 11:30 AM
> > Subject: Re: [PSUBS-MAILIST] Sonar Transparent
> >
> >
> > George,
> >
> > Contact Dr. Gary Boucher (engineer@sport.rr.com). Gary designed and
built his on Psub about 10 years back. He checks in with psubs now and
then but does not follow message board on a regular basis. Gary did his
doctorial dissertation on sonar for his psub. I am sure he would be able to
guide you in this issue.
> >
> > Cliff
> >
> >
> >
> > ----- Original Message -----
> > From: George Slaterpryce
> > To: personal_submersibles@psubs.org
> > Sent: Tuesday, August 01, 2006 7:41 AM
> > Subject: [PSUBS-MAILIST] Sonar Transparent
> >
> >
> > I'm looking for some sort of sonar/radio transparent material I can
use for my transducer housing. At the moment I'm fooling around with some
cheap hobby-store rsonar appMods for educational robotics, and pretty much
every single thing I try completley negates the sonar.
> >
> > I've even tried mounting it on a piece of teflon sheeting and it
still seemed to "muffle" it.
> >
> > The option of canabalizing a fish finder as a sonar system like was
done for Archimedes is unfortunatley not an option. This system is far too
small to support the weight.
> >
> > As for an update, now that I've gotten back into things since my
work schedule cooled down some.
> > 1. BugEye is at the bottom of the pond, I got the tether tangled in
something and was stupid enought to pull until I got only the tether back.
Much Colorful language ensued.
> > 2. Archimedes is slowly shaping up... but everything is so expensive
for that scale that I do one thing at a time.
> > 3. BugEye II is in the works, I'm hoping to make it smaller and add
two new sensors 1. A sonar system (Not severely powerful, but good enough
for 2 meter view ahead in zero visibility conditions) 2. an extendable probe
w/ one of those "screw picker upper" gripping hands at the tip. BugEye II is
designed to be smaller than the original BugEye, I thought of outfitting
BugEye II with some sort of radio control... like maybe WiFi control (I saw
a neat little appmod that can be used for this) or some other type of radio
control, but I'm uncertain about the reliabilty of transmitting through
water at anything beyond the most minor of depths.
> >
> > Design Flaws Found With BugEye (For anyone else that wants to learn
from its demise)
> > 1. Teflon is a wonderful building material, but it's not good for
mounting things onto, you need to find things to anchor to. It's kind of
like putting a screw in drywall without hitting a stud.
> > 2. I didn't take into account the length of my tether, if you're
tether is over 100` you need to design for the reduced power you'll get
through the lines.. ESPECIALLY when your working with such low power
equipment that goes into robotics to begin with.
> > 3. I just screwed my teather into the coax plug and the power cord
was snapped in, next time I'll put an eye hook on or something so I can hook
it up to that before I plug it in.
> >
> > And that is my question and progress update for the day.
> >
> >
> > George H. Slaterpryce III
> >
>
>
>
> ************************************************************************
> ************************************************************************
> ************************************************************************
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003. Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> removeme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of
> our server receiving your request.
>
> PSUBS.ORG
> PO Box 311
> Weare, NH 03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
>
>
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.
PSUBS.ORG
PO Box 311
Weare, NH 03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************