From: vbra676539@aol.com
Reply-To: personal_submersibles@psubs.org
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] propulsion
Date: Sun, 03 Dec 2006 18:00:50 -0500
Joe, Did I mention the weldment drawing for the PC-8 hull that I have?
Vance
-----Original Message-----
From: joeperkel@hotmail.com
To: personal_submersibles@psubs.org
Sent: Sun, 3 Dec 2006 5:13 PM
Subject: Re: [PSUBS-MAILIST] propulsion
Frank,
I guess efficiency is how you define it's use. The large slow wheel can't
be beat for transits in wind and current. But, for precise station keeping,
nothing would beat the thrusters.
A combination of the above would be a truly fantastic machine!
I would copy and improve upon PC- 14 if I had the technical experience and
know-how. My scheme is a combination of pre-existing plans and a bit of
imagination, but that one ( PC-14 ) would really have some serious
potential!
Joe
>From: ShellyDalg@aol.com
>Reply-To: personal_submersibles@psubs.org
>To: personal_submersibles@psubs.org
>Subject: Re: [PSUBS-MAILIST] propulsion
>Date: Sun, 3 Dec 2006 16:46:15 EST
>
>Hi Vance. You're right. I'm using Madison Ave numbers for thrust and
won't
>really know how much until I get them wet.
>As for the low speed maneuvering from a big, single prop.....it is more
>efficient ( in power used ) but I would think also less precise.
>Another thing to consider is the ability to stop rotation and then
reverse
>it. A larger prop will take more time to come to a stop, and require more
>time
>and power to start. I think a short burst of power applied to a large
prop
>would be less efficient than the same power applied to a small one.
>My guess is that the efficiency ( thrust per watt ) on a larger prop is
>realized only after reaching the optimum level for that particular prop.
>Start-up and reversing to stop, or " bumping" the prop to move just a
>little
>can't be efficient, and the larger the prop....the more energy is used to
>start it.
>Anything that spins has a gyro effect. The larger it is, the more power
it
>takes to get it going.
>If we wanted to move just 6 inches and stop, and do that 20 times, it
seems
>like it would be tough with a single big prop.
>A small prop could be bumped with much less power consumed.
>As for steering, you're right again. Trying to steer with just thrusters
>would be difficult to hold a straight heading, and the constant
throttling >up
>and down would take lots more power and waste a lot. Air or hydraulic
>rudder and
> dive planes are the obvious power savers.
>Let me know what you think. Frank D.
>
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.
PSUBS.ORG
PO Box 311
Weare, NH 03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web,
free AOL Mail and more.